Special technical equipment of JSC TEMP  Plant is developing year by year thanks to the introduction of new technologies, usage of modern quality materials and the efficient management of production processes.

Success in the production of galvanic equipment is confirmed by the trust of native and foreign customers. This time, JSC TEMP Plant performed the order for the galvanic anodizing line, for the Filmotekhnik company from Kyiv.

Automated galvanic anodizing line, in complete with automated local installation of wash water cleaning, designed for the anodic oxidation of aluminum alloys, followed by painting and sealing of the oxide layer.

All galvanic equipment of JSC TEMP Plant is unique and produced according to all wishes of the customer.

      

Look video here

Variables

Characteristiсs

Parameters

Line productivity, m²/h, no less 1,0
The maximum overall dimensions of the workpiece, mm 700 *660*400
Line exit time to the operating mode at the air temperature not less than 15 ° С, no more 240
Installed line power, kW 180
Line local exhaust ventilation capacity, m³/h, not less 10000
Tap water consumption l/h, no more 200
Overall dimensions of the section for line installation, neutralization and scrubber installation, mm, no more 17000*3900*3000
Line weight (without solutions), kg, no more 8000
Dimensions 17000*3900*3000

 

Baths design requirements

Operation Name Quantity, pieces Internal dimensions of the bath (LxBxH), mm Solution Volume, dm³ Baths material Solution temperature, C °, heater material Подача води Level control Power supply

Bubbling

Chemical degrease 1 1200*600*900 500 PP 60-80

Stain.

+ + +
Chemical degrease I 1 1200*600*900 500 PP 60-80

Stain.

+ + +
Chemical degrease II 1 1200*600*900 500 PP + +
Illumination 1 1200*600*900 500 PVC +
Decorative anodizing 1 1200*1200*900 1200 PP 15-25

Titanium cooling

+

(for cooling)

600А/24V +
Solid anodizing 1 1200*1200*900 1200 РЕ without thermal isolation (-15) – (-10)

Titanium cooling

800А/100V +
Dyeing 2 1200*600*900 500 PP 30-50

Stain.

+ + +
Seals in hot water 1 1200*600*900 500 РР 80-90

Stain.

+ + +
2 cascade washing 3 1200*(600*2)*900 500*2 PP + ++
Cold washing 2 1200*600*900 500 PP + +
Hot washing 1 1200*600*900 500 PP 60-80

Stain.

+ + +

 

Abbreviation

PP – polypropylene by AG SIMONA (Germany) or a similar European manufacturer

PVS – polyvinyl chloride (viniplast) by AG SIMONA (Germany) or similar European manufacturer

PE – polyethylene by AG SIMONA (Germany) or a similar European manufacturer

Stain. – Stainless Steel